TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 284 of 554

TM 9-2815-224-34&P

Fuel Injector Maintenance Instructions (Cont)

12-2. FUEL INJECTOR REMOVAL/INSTALLATION (CONT).

a. Removal.

NOTE

This procedure tells how to remove

and install one injector. Remove and

install other seven injectors in same

way.

(1) Loosen retaining nut (1) and

injector control rack lever adjusting

screw (2).

(2) Slide injector control rack lever (3)

away from injector control rack (4).

(3)

Mark and remove screw (5), convex

washer (6), and clamp (7).

NOTE

Injector tube hole in cylinder head

must be covered to keep dirt out.

(4)

Remove injector (8).

WARNING

●

Compressed air used for cleaning

purposes will not exceed 30 psi

(207 kPa). Use only with effective

chip guarding and personal

protective equipment

(goggles/shield, gloves, etc.).

●

When working with fuel, post signs

that read “NO SMOKING WITHIN

50 FEET”. To avoid serious injury

or death, keep fuel away from open

fire and keep fire extinguisher

within easy reach when working

with fuel.

(5) Clean exterior of each injector (8)

with diesel fuel and dry with

compressed air.

12-2