TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 351 of 554

TM 9-2815-224-34&P

Blower Maintenance Instructions (Cont)

NOTE

Six puller screws must be 1/4 in.-20 x

1-1/4 in. (32 mm) or longer.

(17)

Install three screws and aline two

puller tools to rear end plate (29).

(18)

Turn both puller screws (15) evenly

and remove rear end plate (29).

(19)

Remove puller tool from rear end

plate (29).

plate (23).

front end of blower housing (31) and indicate

(21)

Tag front end plate (23) and indicate top. Tag

(20)

Remove two screws (26) from front end

top.

(22)

Remove front end plate (23) by tapping with

mallet.

CAUTION

Handle rotors with care to avoid

scratching surfaces.

NOTE

Tag rotors before removal.

(23)

Remove right rotor (32) and

left rotor (33).

14-19