TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 354 of 554

TM 9-2815-224-34&P

Blower Maintenance lnstructions (Cont)

14-4.

BLOWER REPAIR (CONT).

c. Assembly.

NOTE

Model A seal, with three parts: collar, oil seal ring, and carrier, is not available.

Model B seal repair kit has a double-lip oil seal and spacer.

(1)

Support rotor (1) on blocks.

(2)

Deleted.

(3)

Deleted.

(4)

Deleted.

CAUTION

Do not lubricate seal, spacer, or rotor shaft before assembly

a Teflon type and must be installed dry for proper sealing.

Seal is of

(4.1)

Install four spacers (4.1) on two rotors (1) with installer (4.2),

pressing until shoulder of tool or spacer contacts rotor.

NOTE

Numbered side of seal must be toward installation tool. Seal

is properly installed when installation tool contacts end

plate.

(4.2)

Install four double-lipped oil seals (4.3) into two end

plates (6) and (10) (10 not shown) using installation

tool (4.4).

(4.3)

Remove four plastic seal protectors (4.5) from four

double-lipped oil seals (4.3).

14-22

Change 2