TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 363 of 554

(50)

(51)

TM9-2815-224-34&P

Blower Maintenance Instructions (Cent)

Turn blower (7) right side up and

place 0.010-in. (0.254 mm) feeler gage

between rotor lobes (29 and 30).

Rotate rotors while gage is installed.

Remove feeler gage.

NOTE

To increase or decrease gap between leading edge of right rotor lobe and trailing

edge of left rotor lobe (30), do steps

(52)

through

(55).

(52)

Install puller tool on left timing gear (23) with two screws.

(53)

Install puller tool on right timing gear (22) with three screws.

(54)

Tighten puller screws evenly to remove timing gears (22 and 23).

14-31