TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 378 of 554

TM 9-2815-224-34&P

Turbocharger Maintenance Instructions (Cont)

14-6. TURBOCHARGER REMOVAL/INSTALLATION (CONT)

(7)

Install two screws (6) and

lockwashers (7) in

turbocharger (5).

(8)

Tighten screws (6) to 45 to 50 lb-ft

(61 to 67 N•m).

(9)

Position two clamps (3), one over

air inlet adapter (2) and one over

turbocharger (5).

(10)

Tighten clamps (3).

(11)

Fill center housing (8) with lubricating oil

through fitting (9).

(12)

Connect oil tube (10) to fitting (9) and tighten

nut (11).

(13)

Install tee (12), gasket (13), four nuts (14), and

lockwashers (15) on turbocharger (5).

NOTE

Some engines have a connector. Others have an elbow. Refer

to TM 9-2320-279-24P

(14)

Connect oil hose (16) to elbow (17).

NOTE

Some engines do not have screw, lockwasher, and clip. Refer to

TM 9-2320-279-24P

(15)

Install clip (18) with screw (19) and lockwasher (20).

14-42

Change 2