TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 373 of 554

TM 9-2815-224-34&P

Blower Maintenance Instructions (Cont)

b. Installation.

(1)

Position gasket (1) and two preformed packings (2) on blower (3).

NOTE

There are two models of air inlet adapter. Model B has a removable air inlet. If

installing Model A, perform step

(2).

If installing Model B, perform steps

(3

through

3.4).

(2)

Install air inlet adapter (4) with 10 screws (5) and lockwashers (6). Tighten to 45 lb-ft (61 N•m).

(3)

Install elbow (6.1) and plug (6.2) in air inlet adapter (4).

(3.1)

Install air inlet adapter (4) with 10 screws (5) and lockwashers (6). Tighten to 45 lb-ft (61 N•m),

(3.2)

Install hose (6.3) in elbow (6.1).

(3.3)

Install gasket (6.4) and air inlet (6.5) on air inlet adapter (4) with three screws (6.6). Tighten

screws to 16 to 20 lb-ft (22 to 27 N•m).

(3.4)

Install hose clamp (6.7) with screw (6.8), lockwasher (6.9, and washer (6.10).

Change 2

14-37