TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 386 of 554

TM 9-2815-224-34&P

Turbocharger Maintenance Instructions (Cont)

14-7.

TURBOCHARGER REPAIR (CONT).

(11)

Inside diameter of center housing (12) must not be greater

than 0.9842-in. (24.998 mm).

(12)

Seal bore (13) must not be greater than 0.6895-in

(17.513 mm).

(13)

Bearing (14) inside diameter must be 0.9783 to 0.9787-in. (24.849

to 24.859 mm) (Model A only).

(14)

Thrust collar (15) thickness must not be less than 0.2970-in.

(7.543 mm) (Model A only). Thrust collar bore inside diameter

must not be greater than 0.3778-in. (9.596 mm) (Model A only).

(15)

Ring groove width will not be greater than 0.0715-in (1.816 mm).

Sleeve spacer (16) outside diameter must not be less than 0.6705-in.

(17.030 mm).

(16)

Replace damaged parts.

14-50

Change 2