TM-9-2815-224-34-P

ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA

DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JANUARY 1988

TM-9-2815-224-34-P - Page 388 of 554

TM 9-2815-224-34&P

Turbocharger Maintenance Instructions (Cont)

14-7. TURBOCHARGER REPAIR (CONT).

NOTE

Flat surface of sleeve spacer faces up.

(6)

Coat sleeve spacer (15) with grease and install two new

piston rings (14).

(7)

Install sleeve spacer (15) in compressor backplate (16).

(8)

Aline oil lubrication holes (17), and install backplate (16)

on center housing (5).

CAUTION

Used lockplates must not be reused. Screws can come loose and

destroy turbocharger.

NOTE

Model B turbochargers do not have lockplates. Refer to

TM 9-2320-279-24P.

(9)

Install four new lockplates (18) and four screws (19) in

backplate (16).

(10)

(11)

Tighten screws (19) to 80 to 100 lb-in. (9 to 11 N•m).

Bend tabs of lockplates (18) up against screws (19).

14-52

Change 2