TM-9-2815-224-34-P
ENGINE, DIESEL:8-CYLINDER TURBOCHARGED, DETROIT DIESEL CORPORATION MODEL 8V92TA
DIRECT SUPPORT AND GENERAL SUPPORT MAINTENACE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JANUARY 1988
TM-9-2815-224-34-P - Page 91 of 554
(16)
Install engine
lifting
bracket (29).
NOTE
Left and right banks are
different. Left bank has
three screws. Right bank
has only two screws.
Bracket shown being
installed on left bank.
d.
(17)
Install two
screws (30),
lockwashers (31),
and hose
clamp (32).
Tighten screws to
20 to 25 lb-ft (27 to
34 N•m).
Cylinder Head Maintenance Instructions
TM 9-2815-224-34&P
NOTE
Some engines have a fuel modulator air supply hose on the left bank. For engines
with fuel modulator air supply hose, perform steps
(17.1)
and
(17.2).
For engines
without fuel modulator or for right bank, perform step
(18).
(1)
Install injector control tube (para 12-5).
(2)
Install exhaust manifold (para 9-2).
(3)
Install governor cover (para 15-4).
(4)
Install rocker cover (TM 9-2320-279-20).
(5)
Install thermostat housing (TM 9-2320-279-20).
(6)
Install thermostat hoses (TM 9-2320-279-20).
(7)
Install air cleaner air hoses (TM 9-2320-279-20).
(8)
Install muffler exhaust pipe (TM 9-2320-279-20).
(9)
Stow spare tire (TM 9-2320-279-10).
(10)
Fill engine cooling system (TM 9-2320-279-20).
(11)
Connect batteries (TM 9-2320-279-20).
(12)
Close engine cover (TM 9-2320-279-10).
(17.1)
Connect hose (32.1) to elbow (32.2).
(17.2)
Install hose (32.1), clamp (32.3), bracket (33), lockwasher (35), and screw (34).
(18)
Install bracket (33), screw (34), and lockwasher (35).
(19)
Install two screws (36), lockwashers (37), and washers (38). Tighten screws to 20
to
25 lbs-ft (27
to 34 N•m).
Follow-on Maintenance.
END OF TASK
Change 2
3-43
Back to Top
