TM 9-2815-224-34&P
Cylinder Head Maintenance Instructions (Cont)
3-8. CYLINDER HEAD REPAIR (CONT).
(15)
Remove four injectors (1) from injector
holes (2).
WARNING
Adhesives, solvents, and sealing compounds
can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To
avoid injury or death, keep away from open
fire and use in well-ventilated area. If
adhesive, solvent, or sealing compound gets
on skin or clothing, wash immediately with
soap and water.
(16)
Clean cylinder head with drycleaning
solvent.
WARNING
Compressed air used for cleaning purposes
will not exceed 30 psi (207 kPa). Use only
with effective chip guarding and personal
protective equipment (goggles/shield, gloves,
etc.).
(17)
Dry cylinder head with compressed air.
d. Assembly.
3-50
Change 2