TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 492 of 736

TM 9-2815-225-34&P

0052 00

0052 00-4

ILLUSTRATED LIST OF MANUFACTURED ITEMS (Contd)

PROCEDURE:

1. Using hack saw, cut off head of screw.

2. Round off edge of non-threaded end of screw.

3. Using press, cut a slit approximately 0.06 in. (1.57 mm) wide and 0.125 in. (3.17 mm)

deep in non-threaded end of screw.

4. Using grinding wheel, remove any burrs after cutting.

ITEM 3. VIBRATION DAMPER GUIDE PIN

0.06 in.

(1.57 mm)

0.125 in.

(3.17 mm)

END OF WORK PACKAGE