TM-9-2815-225-34-P

ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST

JULY 2005

TM-9-2815-225-34-P - Page 493 of 736

TM 9-2815-225-34&P

0053 00

0053 00-1

DIRECT SUPPORT AND GENERAL SUPPORT

MAINTENANCE MANUAL

INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)

FOR

M915, M915A1, M915A4, M916, M920 VEHICLES

NSN 2815-01-082-8125

P/N NTC400-3652-02

CUMMINS NTC-400 BIG CAM I DIESEL ENGINE

W/CONTAINER

NSN 2815-01-142-2745

P/N 11669835

CUMMINS NTC-400 BIG CAM III DIESEL ENGINE

W/CONTAINER

TORQUE LIMITS

SCOPE

CAUTION

General torque specifications cannot be applied to screws or

fasteners that retain rubber components. The rubber components

will be damaged before the correct torque limit can be reached. If a

special torque limit is not given in the maintenance instructions for

use with a rubber component, tighten the screw or nut until it

touches the component, then tighten it one more turn.

This Work Package (WP) provides general torque limits for screws and fasteners used in this manual.

Special torque limits are indicated in the maintenance procedures for applicable components and in table 4,

Torque Specifications. The general torque limits given in this WP shall be used when specific torque limits

are not indicated in the maintenance procedure.