TM-9-2815-225-34-P
ENGINE, DIESEL: 6 CYLINDER IN-LINE TURBOCHARGED, CUMMINS MODEL NTC-400
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST
JULY 2005
TM-9-2815-225-34-P - Page 58 of 736
TM 9-2815-225-34&P
0006 00
0006 00-6
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) INSTRUCTIONS (Contd)
Table 1. Unit Level PMCS Instructions (Contd).
ITEM
NO.
INTERVAL
MAN
HOURS
ITEM TO
CHECK/SERVICE
PROCEDURE
EQUIPMENT NOT READY/
AVAILABLE IF:
10
Semi-annual
1.0
Engine
crankcase
a. Drain and refill crankcase
with OE/HDO lubricating
oil.
b. Replace engine oil filter
and bypass oil filter.
c. Inspect all oil lines and
hoses for cracks and wear
that could cause leaks.
d. Inspect oil filter housing
and oil pan drain plug for
looseness. Ensure oil pan
bolts are tight.
b. Oil filter has Class III
leak.
c. Cracks, frays, leaks, and
wear are evident.
d. Drain plugs and oil pan
bolts are loose.
11
Semi-annual
0.4
Rocker cover
gaskets
Inspect rocker cover gasket
for oil leaks. If necessary,
tighten bolts and/or replace
gaskets.
Crack, frays, leaks, and
wear are evident.
12
Semi-annual
0.5
Oil cooler
and lines
Inspect oil cooler for leaks,
loose hardware, and
damaged fittings.
Crack, frays, leaks, and
wear are evident.
Back to Top
