TM-9-2815-237-34

TM-9-2815-237-34 - Page 15 of 267

2-1

TM 9-2815-237-34

CHAPTER 2

ENGINE MAINTENANCE

Section I. REPAIR PARTS, SPECIAL TOOLS, TEST, MEASUREMENT, AND

DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT EQUIPMENT

2-1. COMMON TOOLS AND EQUIPMENT

Refer to Modified Table of Organization and Equipment (MTOE) for authorized common tools and

equipment applicable to your unit.

2-2. SPECIAL TOOLS AND SUPPORT EQUIPMENT

Special tools and support equipment are listed in Appendix E of this manual and illustrated in TM 9-2815-

237-34P.

2-3. TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT (TMDE)

Calibrate all measuring and test equipment used to determine equipment conformance in accordance with

TB 43-180.

2-4. REPAIR PARTS

Repair parts are listed and illustrated in TM 9-2815-237-34P.

Section Il. SERVICE UPON RECEIPT

2-5. ENGINE INSPECTION

a. Inspect for any damage done to engine during its removal from the vehicle. Refer to TM 9-2320-280-34

for engine removal procedure.

b. Upon receipt of engine, ensure that all components are present and that no engine subassemblies have

been removed. Refer to TM 9-2320-280-34 for engine dress after removal.

c. If the engine has been transferred to you from another DS/GS maintenance facility, check the equip-

ment against the packing slip to see if the shipment is complete. Report all discrepancies in accordance with

the instructions of DA Pam 738-750.