TM-9-2920-257-30-P
GENERATOR, ALTERNATING CURRENT, 200 AMPERES
TECHNICAL MANUAL; DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS
MAY 1987
TM-9-2920-257-30-P - Page 96 of 111
TM 9-2920-257-30&P
APPENDIX F
ILLUSTRATED LIST OF MANUFACTURED ITEMS
F-1. GENERAL
This appendix includes complete instructions for making items
authorized to be manufactured or fabricated at intermediate
direct support maintenance.
F-2. Generator disassemble and assembly requires the use of
F-2. FABRICATED TOOLS
Generator disassembly and assembly requires the use of fabricated
tools. See figures F-1 through F-3 for materials and dimensions
required to fabricate the necessary tools.
F-3. SPECIAL EQUIPMENT
a. A matched set of 35-inch V-belts (O.D.), NSN 3030-00-834-5935
is required for testing the generator .
NOTE
Matched set of V-belts, NSN 3030-00-834-5935
i
S
a four belt set ;
only three belts are needed .
b. A 50 OHM, 300 watt rheostat, NSN 5905-00-497-0732, i s
needed for testing generator. See figure F-4 .
c. Testing generator requires fabricating special wirin g
harnesses, and a special bracket and a rheostat mounting bo x
to be used with the test stand. See figures F-S and F-6 fo r
materials and dimensions required for bracket and rheostat bo x
fabrication. See figures F- 7
through F-12 for materials an d
dimensions for wiring harness fabrication .
Figure F-4.
Rheostat
F-1
Back to Top
