TM-9-2920-257-30-P
GENERATOR, ALTERNATING CURRENT, 200 AMPERES
TECHNICAL MANUAL; DIRECT SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS
MAY 1987
TM-9-2920-257-30-P - Page 98 of 111
TM 9-2920-257-30&P
1.
2.
3.
4,
NOTES:
MATERIAL: STEEL PLATE, IAW
ASTM A36.
MATERIAL STEEL CHANNEL,
C8 x 11.5 IAW ASTM A36.
ALL MACHINED SURFACES TO
BE 250.
FOR INTERPRETATION OF:
DIMENSIONING AND TOLER-
ANCING, SEE ANSI Y145.
DRAWING STANDARDS. SEE
DOD-STD-100.
5. REMOVE BURRS AND BREAK
ALL SHARP EDGES.
6. MARK PART NO. IAW
MIL-STD-130.
7. FINISH 5.1.1 + 21.3 OF
MIL-STD-171.
COLOR-GRAY,
NO. 26037 OF MIL-STD-595
8. WELD IAW MIL-STD-1261
CIASS I.
9. MATERIAL: STEEL ANGLE.< 2 1/2 x 2 x 1/2
IAW ASTM A36.
Figure
F - 5.
Test Stand Bracket
F- 3
PART NO 11020555
Back to Top
