TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 177 of 306
TM 9-3990-260-14&P
CHAPTER 8
OPERATOR MAINTENANCE INSTRUCTIONS
(M3A1 CROP)
Para
Contents
Page
8-1
Troubleshooting Introduction .
..........................................................................................
8-1
8-2
Troubleshooting Symptoms .
............................................................................................
8-1
8-3
Maintenance Introduction .
...............................................................................................
8-2
Section I. TROUBLESHOOTING PROCEDURES
8-1.
TROUBLESHOOTING INTRODUCTION.
This section contains step-by-step procedures for identifying, locating and isolating equipment malfunctions.
8-2.
TROUBLESHOOTING SYMPTOMS.
Refer to Table 8-1 for a list of Troubleshooting Symptoms. Table 8-2 lists the most common troubleshooting proce-
dures found during operation or maintenance of the M3A1 CROP. Tests or inspections and corrective actions
should be performed in the order listed. If a malfunction is not listed or is not corrected by listed corrective actions,
notify the supervisor.
Table 8-1. Operator Troubleshooting Symptom Index
Troubleshooting Procedure
Page
1.
Container transport locks won't engage shoring slots in ISO shipping container .
................
8-2
8-1
Back to Top
