TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 42 of 306
TM 9-3990-260-14&P
2-6
Change 1
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued
Item
No.
Interval
Location
Item to
Check/Service
Procedure
Not Fully Mission
Capable If:
6
After
Blocker
Assemblies
a.
Visually inspect center blocker
assembly mounting and stowage pockets
(15) and both rear blocker assemblies
mounting and stowage pockets (16 & 17)
for corrosion, dirt, and damage.
b.
Visually inspect center blocker
assembly (18) and both rear blocker
assemblies (19 & 20) to ensure each is
straight and free of bends, tears, or rips
that would prevent its installation or
installation of dunnage.
One or more blocker
assembly is missing or
damaged such that it
cannot be installed or
used properly.
Back to Top
