TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 49 of 306
TM 9-3990-260-14&P
b. Stowing the Center Blocker Assembly.
(1) Disconnect two bolt snaps (1) from their positions clipped to each spring snap lanyard loop
(6), remove the center blocker (3), and place it at its stowed position.
(2)
Insert the center blocker assembly legs (4) into the circular holes in the side beams located at
either side of the CROP, ensuring no part of the center blocker assembly protrudes past the
outside edge of the CROP side beam.
(3)
Secure the center blocker assembly (3) by inserting each bolt snap (1) through the closest
tiedown ring (2) secure the bolt snap (1) to its own lanyard
.
2-13
Back to Top
