TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 53 of 306
TM 9-3990-260-14&P
NOTE
•
The left rear blocker is stowed on the left side of the CROP deck and the right
rear blocker is stowed on the right side of the CROP deck.
•
Ensure that the smooth side (sheet metal side) of the blockers is facing away
from the cargo deck in the stowed position.
•
The forward leg of the blocker is inserted into the circular hole in the side beam,
located approximately 71 inches (180 cm) from the rear edge of the deck.
(2)
Insert the rear blocker assembly legs (11) into the circular holes (9) located at the side of the
deck. Ensure the smooth side (sheet metal side) is facing away from the cargo deck.
(3)
Ensure the hitch pin clips (7) and lanyards are positioned on the side of the blocker facing the cargo deck.
(4)
Clip each hitch pin clip (7) to the nearest tiedown ring (2).
2-17
Back to Top
