TM-9-3990-260-14-P
CONTAINER ROLL-IN/OUT PLATFORM (CROP) MODEL M3 AND MODEL M3A1
TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL (INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST)
JULY 2001
TM-9-3990-260-14-P - Page 46 of 306
TM 9-3990-260-14&P
2-10
Change 1
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued
Item
No.
Interval
Location
Item to
Check/Service
Procedure
Not Fully Mission
Capable If:
13
After
Bracing
Mechanisms
Ensure threaded rod (30) is not bent and
threads are serviceable. Adjusting collar
can be adjusted entire length of threaded
rod (30). Ensure cam (31) can be freely
rotated around threaded rod (30) and is
not bent. Ensure adjusting and securing
pin (32) and hitch pin clip (33) are
available and serviceable.
Either of the two bracing
mechanism threaded rods
cannot be adjusted, either
cam will not rotate to be
inserted into a shoring slot
in an ISO container, or
any threaded rod or hitch
pin clip is missing.
Back to Top
