TM-9-6675-262-10
AIMING CIRCLE M2 W/E AND M2A2 W/E
TECHNICAL MANUAL; OPERATOR MANUAL
DECEMBER 2013
TM-9-6675-262-10 - Page 35 of 68
0005-3
EMPLACING THE TRIPOD- (Continued)
3.
Place M24 tripod plate head (Figure 2, Item 4) upright, leg boots toward
the ground.
Step on leg boots (Figure 3, Item 1) and (Figure 3, Item 2) to
set tripod firmly in place.
4.
Bring tripod head (Figure 3, Item 3) into approximate level position by
adjusting the length of the tripod legs (Figure 3, Item 4).
Make sure leg
clamp thumbscrews (Figure 3, Item 5) are tight.
END OF TASK
Back to Top
