TM-9-6675-262-10
AIMING CIRCLE M2 W/E AND M2A2 W/E
TECHNICAL MANUAL; OPERATOR MANUAL
DECEMBER 2013
TM-9-6675-262-10 - Page 33 of 68
0005-1
0005
OPERATION UNDER USUAL CONDITIONS
GENERAL OPERATING PROCEDURES
INITIAL SETUP:
N/A
EMPLACING THE TRIPOD
1.
Unstrap tripod legs (Figure 1, Item 1), loosen leg clamp thumbscrews
(Figure 1, Item 2) and fully extend each leg to desired length.
Tighten
leg clamp thumbscrews (Figure 1, Item 3).
Back to Top
