TM-9-6675-262-10
AIMING CIRCLE M2 W/E AND M2A2 W/E
TECHNICAL MANUAL; OPERATOR MANUAL
DECEMBER 2013
TM-9-6675-262-10 - Page 52 of 68
0010-2
HAND LIGHT LAMP REPLACEMENT- (Continued)
3.
Screw cap (Figure 1, Item 2) onto lead wire (Figure 1, Item 2).
END OF TASK
BRACKET LIGHT LAMP REMOVAL
1.
To remove bracket light lamp, unscrew light bracket (Figure 2, Item 1)
from lead cable (Figure 2, Item 2).
2.
Unscrew lamp (Figure 2, Item 3) from lead cable (Figure 2, Item 2) and
use lamp extractor (Figure 1, Item 4) stored in accessory case.
BRACKET LIGHT LAMP REPLACEMENT
1.
Push glass bulb of lamp (Figure 2, Item 3) into lamp extractor (Figure 1,
Item 4).
Back to Top
