TM-9-6675-262-10
AIMING CIRCLE M2 W/E AND M2A2 W/E
TECHNICAL MANUAL; OPERATOR MANUAL
DECEMBER 2013
TM-9-6675-262-10 - Page 53 of 68
0010-3
BRACKET LIGHT LAMP REPLACEMENT – (Continued)
2.
Screw lamp (Figure 2, Item 3) into lead cable (Figure 2, Item 2) and
remove lamp extractor (Figure 1, Item 4).
3.
Screw light bracket (Figure 2, Item 1) onto lead cable (Figure 2, Item 2).
END OF TASK
BATTERY REMOVAL
1.
Press cap assembly (Figure 3, Item 1) and turn counterclockwise.
2.
Remove cap assembly (Figure 3, Item 1) from light tube (Figure 3, Item
2).
3.
Remove D-cell batteries (Figure 3, Item 3) and (Figure 3, Item 4) from
light tube (Figure 3, Item 2).
BATTERY REPLACEMENT
1.
Insert two D-cell batteries (Figure 3, Item 3) and (Figure 3, Item 4) in light
tube (Figure 3, Item 2).
2.
Align pins in cap assembly (Figure 3, Item 1) with slots in light tube
(Figure 3, Item 2).
3.
Press in on cap assembly (Figure 3, Item 1) and turn clockwise to lock it
in place.
Back to Top
