- FSG 31 - Bearings
- FSC 3110 - Bearings, Antifriction, Unmounted
- NSN 3110-00-863-1211
3110-00-863-1211
BEARING,BALL,DUPLEX
3110-00-863-1211 (3110008631211, 008631211)
Part Numbers (6 listings): 2-300-028 | 453747 | 1911SD301T | D3-50156 | 2-300-028-01 | 2-300-028-03 |
| Manufacturer Part Number | RNCC | RNVC | Manufacturer Name | CAGE | |
|---|---|---|---|---|---|
| 2-300-028 | 1 - Source of Control Reference | 2 - Production Item | HONEYWELL INTERNATIONAL INC. | 99193 |  |
| 453747 | 3 - Design Control Reference | 2 - Production Item | SKF USA INC. | 52676 |  |
| 1911SD301T | 3 - Design Control Reference | 2 - Production Item | SKF USA INC | 38443 |  |
| D3-50156 | 5 - Replaced / Discontinued | 2 - Production Item | SKF USA INC | 38443 | |
| 2-300-028-01 | 5 - Replaced / Discontinued | 2 - Production Item | HONEYWELL INTERNATIONAL INC. | 99193 | |
| 2-300-028-03 | 5 - Replaced / Discontinued | 2 - Production Item | HONEYWELL INTERNATIONAL INC. | 99193 | |
1 - Source of Control Reference
Reference Number Category Code (DRN_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
3 - Design Control Reference
Reference Number Category Code (DRN_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5 - Replaced / Discontinued
Reference Number Category Code (DRN_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
2 - Production Item
Reference Number Variation Code (DRN_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
| FSG | FSC | NIIN | FIIG | INC | CRITICALITY | TYPE OF ITEM | MRC | DEMIL | HMIC | EDC | PMIC | ADPEC | DATE CREATED |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 31 | 3110 | 008631211 | A044A0 | 30213 | N | 1 | A | N | U | 1 Jan 1962 |
A044A0
Federal Item Identification Guide (FIIG_4065)
30213
Item Naming Code (INC_4080)
1 Jan 1962
NIIN Assignment Date (DT_NIIN_ASGMT_2180)
N
Item Criticality (CRITL_CD_FIIG_3843)
The item does not have a critical feature such as tolerance, fit restrictions or application. Nuclear hardness
properties have not been determined (not valid for input).
1
Type of Item Identification (TYP_II_4820)
Full Descriptive Item Identification
A
Demilitarization Code (DEMIL_CD_0167)
Non-MLI/ Non-SLI — Demilitarization not required.
N
Hazardous Material Indicator Code (HMIC_0865)
Indicates there is no data in the HMIRS and the NSN is in a FSC not generally suspected of containing hazardous materials.
U
Precious Metals Indicator Code (PMIC_0802)
Precious Metal Content is unknown.
| MOE Rule | Former MOE | AMC | AMSC | NIMSC | IMC | IMC Activity | AAC | DSOR | Collaborators | Receivers | Effective Date | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A702 | 1 | B | A | E | CT | 1 Apr 1991 | ||||||||||||||||||||||||
| ZC01 | 1 Apr 1991 | |||||||||||||||||||||||||||||
| YB01 | 1 Feb 1994 | |||||||||||||||||||||||||||||
| ZU01 | 1 Jul 1995 | |||||||||||||||||||||||||||||
1
Acquisition Method Code (AMC_2871)
Suitable for competitive acquisition. Potential sources shall include dealers/distributors. If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.
B
Acquisition Method Suffix Code (AMSC_2876)
Acquisition of this part is restricted to source(s) specified on "Source Control", "Altered Item" or "Selected Item" drawings/documents. Valid AMCs: 1, 2, 3, 4 and 5.
A
Nonconsumable Item Material Support Code (NIMSC_0076)
An activitiy within the Army is providing depot maintenance support.
E
Item Management Code (IMC_2744)
Reparables: Centrally managed recoverable items designated as reparable for the reasons that repair of unserviceable quantities of the items are considered by the inventory manager in satisfying requirements prior to or in conjunction with determining procurement quantities.
CT
Item Management Coding Activity (IMC_ACTY_2748)
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
| RNFC | RNCC | RNVC | DAC | RNAAC | RNSC | RNJC | SADC | MSDS | HCC | Reference Number | CAGE | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 2 | 1 | CT | A | 2-300-028 | 99193 |
|
|||||
| 3 | 3 | 2 | 5 | CT | D | 1911SD301T | 38443 |
|
||||
| 1 | 3 | 2 | 5 | CT | A | 453747 | 52676 |
|
||||
| 3 | 5 | 2 | 5 | CT | D | D3-50156 | 38443 |
|
||||
| 5 | 2 | 1 | CT | D | 2-300-028-01 | 99193 |
|
|||||
| 5 | 2 | 1 | CT | D | 2-300-028-03 | 99193 |
|
|||||
1
Reference Number Category Code (RNCC_2910)
Source of Control Reference. The number assigned by a design control manufacturer of an end item of equipment, including a Government activity, to a drawing that restricts procurement (1) to the specified item(s) described on the drawing and (2) to the stated source(s) of supply designated thereon. These restrictions are imposed on the cognizant design activity to ensure procurement of the only item(s) known as a result of test or evaluation to be satisfactory for the stated critical application. Includes only those drawings which meet the definition for Source Control Drawing in MIL-STD-100. (Applicable only to type 1, 1B, 2, 4 and 4B item identifications.)
2
Reference Number Variation Code (RNVC_4780)
A design control or other reference number that is an item-identifying number for an item of production, or a source control reference or a specification or standard part, type, or similar reference number that is an item-identifying number for an item of supply.
1
Document Availability Code (DAC_2640)
The reference number is represented by a drawing and the drawing was available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number. The RNAAC will furnish the drawing upon request.
CT
Reference Number Action Activity Code (RNAAC_2900)
U.S. Army Aviation and Missile Command (AIR) Redstone Arsenal, AL 35898-5230
A
Reference Number Status Code (RNSC_2923)
Manufacturer and reference number are authorized for procurement. Under this reference number items can be procured only from the manufacturer identified by the NCAGE. NOTE: This code may only be used for reference numbers originating from manufacturers' standards or catalogs or for copyrighted drawing numbers.
3
Reference Number Format Code (RNFC_2920)
Number format is unknown. (Coded RNFC 3 by the Defense Logistics Information Service upon implementation of FLIS.)
3
Reference Number Category Code (RNCC_2910)
Design Control Reference. The primary number used to identify an item of production or a range of items of production, by the manufacturer (individual, company, firm, corporation, or Government activity) which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.
5
Document Availability Code (DAC_2640)
The reference number is represented by a drawing, but the drawing was not available to the RNAAC, who may or may not be the submitting activity, at the time of submission of the reference number.
D
Reference Number Status Code (RNSC_2923)
Procurement authority of the manufacturer and reference number have not yet been checked. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.
1
Reference Number Format Code (RNFC_2920)
Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9.Number is formatted as configured on the originating document with the exception of the modification required in volume 2, chapter 2.9 .
5
Reference Number Category Code (RNCC_2910)
Secondary Reference. Any additional number, other than a primary number (codes 1,2,3,4) informative reference (code 6) or vendor item drawing reference (code 7) assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number (NSN) was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.
| ISC | Originator | NIIN Status | Replaced / Replacement ISC | Replaced / Replacement Originator | Replacement NIIN Status | Replacement Date | Replaced / Replacement NSN | Decision Date |
|---|---|---|---|---|---|---|---|---|
| 2 | KZ | 0 | 24 Jul 1980 |
2
Item Standardization Code (ISC_2650)
An item authorized for procurement which has been included in an item reduction study and which initially does not replace an item not authorized for procurement. In addition, in generic relationships, a code 2 item is related to a code 1 item.
KZ
Originator of Standardization Decision (ORG_STDZN_DEC_9325)
Defense Supply Center Philadelphia, Philadelphia, PA 19101
0
NIIN Status Code (NIIN_STAT_CD_2670)
Item is active. File data coded KFD is forwarded. if this KFD data represents
your item of supply, submit, if applicable, an LAD, LAU, or LCU transaction.
Otherwise, use the National Stock Number (NSN) in your supply system.
24 Jul 1980
Standardization Decision Date (DT_STDZN_DEC_2300)
| Integrity | Originating | HMC | LCL | WCC | TCC | SHC | ADC | ACC | ASH | LTL | NMFC | NMFC Sub Item | UFC | Freight Description | Rail Variance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 742 | Z | 9 | A | A | Z | P | 114820 | X | 58860 | BEARINGS-BUSHINGS-NOI-BALL-ROLLER |
XX
Originating Activity Code (ORIG_ACTY_CD_4210)
742
Water Commodity Code (WRT_CMDTY_CD_9275)
Bearings
Z
Type Cargo Code (TYPE_CGO_CD_9260)
No special type of cargo code applicable
9
Special Handling Code (SP_HDLG_CD_9240)
No special handling required
A
Air Dimension Code (AIR_DIM_CD_9220)
Shipment is not a consolidation and does not exceed 72 inches in any dimension.
A
Air Commodity Code (AIR_CMTY_HDLG_9215)
Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft instruments and laboratory test equipment, aerial targets and gliders, aircraft/missile technical order compliance kits, etc
Z
Air Special Handling Code (AIR_CMTY_HDLG_9215)
No special handling required.
P
Less Than Truckload (CLAS_RTNG_CD_2770)
77.5
114820
National Motor Freight Classification Number (NMFC Item Number) (NMFC_2850)
X
NMFC Sub Item Number (SUB_ITM_NBR_0861)
58860
Uniform Freight Classification (UFC_CD_MODF_3040)
BEARINGS-BUSHINGS-NOI-BALL-ROLLER
Freight Description (FRT_DESC_4020)
Rail Variance
Rail Variance (RAIL_VARI_CD_4760)
No Variation. NMFC and UFCC Match.
B17
Source of Supply (SOS_CD_3690) or Source of Supply Modifier (SOSM_CD_2948)
US Army Aviation and Missile Command (Air), ATTN: AMSMI-LC-MM-C, Redstone Arsenal, AL 35898-5230
V
Acquisition Advice Code (AAC_2507)
TERMINAL ITEM. Identifies items in stock, but future procurement is not authorized. Requisitions may continue to be submitted until stocks are exhausted. Preferred item National Stock Number is normally provided by application of the phrase: When Exhausted Use (NSN). Requisitions will be submitted in accordance with IMM/Service requisitioning procedures as applicable.
U
Controlled Item Inventory Code (CIIC_2863)
Unclassified
1
Quantity Unit Pack (QUP_6106)
1
D
Reparability Code (REP_CD_DLA_2934 / REP_CD_CG_0709 / ERRC_CD_AF_2655 / RECOV_CD_MC_2891 / RECOV_CD_AR_2892 / MAT_CTL_NVY_2832)
ARMY: When repair is beyond lower level maintenance capability, evacuate the item to depot. Disposal is not authorized below wholesale level; MARINE CORPS: Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal not authorized below depot level; NAVY: Field Level Reparables
EA
Unit of Issue (UI_3050)
Each - A numeric quantity of one item of supply. Do not use if a more specific term applies, such as kit, set, assortment, assembly, group, sheet, plate, strip or length.
0
Shelf Life Code (SLC_2943)
TYPE I or TYPE II (Non-Deteriorative/No Shelf-Life) - An individual item of supply which is determined through an evaluation of technical test data and/or actual experience to be an item with a definite non-extendible period of shelf-life OR An individual item of supply having an assigned shelf-life time period that may be extended after completion of inspection/test/restorative action.
DA
Service / Agency Code (MOE_CD_2833)
Department of the Army
| Source | PICA / SICA | Packaging Category | Storage | Preservation | Clean/Dry | INT Qty | Unit Weight | Unit Size | Unit Pack Cube | Item Weight | Item Dims |
|---|---|---|---|---|---|---|---|---|---|---|---|
| P | P | B | 45 | 1 | 000 | 2.5 lbs | 6in x 6in x 5.5in | 0.115 cu ft | 1.0 lbs | 3.2in x 3.2in x 1.2in |
| Preservation Material | Wrapping Material | Cushioning / Dunnage | Cushioning Thickness | Unit Container | Intermediate Container | Unit Container Level | Special Marking | Level A Packing | Level B Packing | Minimal Packing | Optional Procedure |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 06 | GC | NA | X | ZZ | 00 | A | 17 | F | M |
P
Packaging Data Source Code (PK_DTA_SRC_CD_5148)
Primary Inventory Control Activity (PICA)
P
Primary / Secondary Inventory Control Code (PICA_SICA_IND_5099)
Primary Inventory Control Activity (PICA)
B
Item Type Storage Code (ITM_TYP_STOR_5156)
Unheated General Purpose
45
Method of Preservation Code (MTHD_PRSRV_CD_5160)
Rigid metal container, sealed
1
Cleaning and Drying Procedure Code (CLNG_DRY_PRC_5161)
Any suitable process that is not injurious to the item.
000
Intermediate Container Quantity (INTMD_CTN_QTY_5152)
2.5 lbs
Unit Pack Weight (UP_WT_5153)
6in x 6in x 5.5in
Unit Pack Size (UP_SZ_5154)
0.115 cu ft
Unit Pack Cube (UP_CU_5155)
1.0 lbs
Unpackaged Item Weight (UNPKG_ITM_WT_5157)
3.2in x 3.2in x 1.2in
Unpackaged Item Dimensions (UNPKG_ITM_DIM_5158)
06
Preservation Material Code (PRSRV_MAT_CD_5162)
MIL-C-11796, Class 3, light preservative compound, soft film, hot application
GC
Wrapping Material Code (WRAP_MAT_CD_5163)
MIL-PRF-121, Type I, medium duty, greaseproof, waterproof barrier
NA
Cushioning and Dunnage Material Code (CUSH_DUN_MAT_5164)
PPP-C-795, cellular plastic film cushioning; or A-A-3129, open cell plastic cushioning; or PPP-C-1797, polypropylene foam cushioning; or A-A-59136, polyethylene foam cushioning
X
Thickness of Cushioning or Dunnage Code (THK_CUSH_DUN_5165)
As required to protect the item or elements of the package
ZZ
Unit Container Code (UNIT_CTNR_CD_5166)
Special requirement – See specific instructions or drawings provided.
00
Intermediate Container Code (INTMD_CTNR_CD_5167)
No requirement.
A
Unit Container Level Code (UNIT_CTNR_LVL_5168)
Unit container provides level A packing protection.
17
Special Marking Code (SP_MKG_CD_5169)
Reusable container
F
Packing Requirement Code - For Level A (Maximum) Packing (LVL_A_PKG_CD_5170)
Packing is not required: the unit container shall also serve as the shipping container. Closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.
M
Optional Procedure Indicator Code (OPTNL_PRO_IND_5173)
All packaging data is mandatory for compliance and no substitutions are permitted. Fast packs should be included in this category.
| MRC | Decoded Requirement | Clear Text Reply |
|---|---|---|
| CTHQ | Bearing Preload Rating | 1000.0 POUNDS NOMINAL |
| ABXV | Bore Diameter | 55.0 MILLIMETERS NOMINAL |
| MATT | Material | COPPER ALLOY RETAINER |
| MATT | Material | STEEL BALL |
| MATT | Material | STEEL OUTER RING |
| MATT | Material | STEEL INNER RING |
| AKVV | Internal Clearance | 0.0080 INCHES NOMINAL AXIAL AND 0.0008 INCHES MINIMUM RADIAL AND 0.0017 INCHES MAXIMUM RADIAL |
| AGZC | Load Direction | ANGULAR |
| MDCL | Material Document And Classification | -4001,91547 MFR REF SINGLE MATERIAL RESPONSE BALL |
| MDCL | Material Document And Classification | -4001,91547 MFR REF SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | Material Document And Classification | -3900,91547 MFR REF SINGLE MATERIAL RESPONSE RETAINER |
| MDCL | Material Document And Classification | -4001,91547 MFR REF SINGLE MATERIAL RESPONSE OUTER RING |
| AGYF | Retainer Fabrication Method | MACHINED |
| ADGA | Overall Outside Diameter | 80.0 MILLIMETERS NOMINAL |
| ABMK | Overall Width | 26.0 MILLIMETERS NOMINAL |
| FEAT | Special Features | STABILIZED FOR OPERATION AT 65 DEG F TO P 350 DEG F,THRUST MARKING |
| CTFZ | Standard Tolerance Designation | ABEC NO.5 |
| STYL | Style Designator | COUNTERBORED OUTER RINGS, NON-SEPARABLE, TANDEM MOUNTING |
| AGYE | Surface Finish | GROUND |
| TEST | Test Data Document | +6903-91547 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
Back to Top Back to Top
