TESt
se
the
AN/TSM-82
test
set
card, on the underside of the GM±S, all
breaks at the hinge .²²
from several causes²
the way oUt when you've got to check or
So, when you're not usIng the mike³
change it² ±he A208 has a cabLe attached
secure
it
with
its
captive screw² ±hat
to the rear (the onLy card With a cabLe)² ´f
prevents it from swinging free, esPeciaLLy
you pULl it out Like the others³ yoU can
when you fLip the test set over²
PulL the connector off the cable ²²² or
NaturalLy³ line up the screw before you
start tUrning
it . ² ² to aVoid stripped
threads.
32
moVe the cable ²²² and Che card is free²
REMOVE
CABLE
FRoM THIS
POSItioN
±he aZ²mU³h
l´cK
has to be in
when you put the at-
PLace whenEver you move the test setµto
tenuator/fiLter assembLy in pLace² Adjust
Prevent the
visuaL
target assembLy
and
it so that it bareLy clears ¶he lip of the
oCher components from swinging free²
coLLimator² ±hat way·
the pins on the
inCo Che Cwo LimiC switches on ¶he under¸
side and break them ²²¹ or the asseºbLy
i¶seLf can be damaged. »ither way³ some¸
body Loses. And it doesn't take much to
fiLter cLear ¶he Lens on ¶he weapon round
and trainer²
¼f the pins stick out too far³ they can
scratch the Lens and reduce the effective¸
ness of the trainer and weapon roUnd.
33