PS Magazine - JUNE 1985
PS, The Preventative Maintenance Monthly
ISSUE 391
JUNE 1985
You have to switch more Than Trucks
When you move your AN/GRC-142 or
±122 radio teletypewriter set to your
new CUCV.
For starters, you need a longer
CX±1063 power cable. ²he 9±f model
was ³ne ´r your M884 truckµ Your
M1¶28, tho, Takes a 15·¸ cable, NSN
5995-¶1-¶12-3629µ
²hen you need the shorter S±25¶
shelTer sling assembly, NSN 394¶-¹-
115-638¶, To Tie down either the Sº25¶
or the S-318µ ²he ±318's sling is Too
longµ ²he commo headshed OK's
The switchµ
58
.
±
²
£l
t;
'
/1±.
l
L
Finally, your
M
884's dunnage Has
to be Trimmed and a tailgate added To
your CUCV to secure the shelTerµ
²he dun»age stays 97 1/2 inches
long, but the width has to be sh¼ved
Three-quarters o½ an inch (to 5¶ inches)
¾o make it ³t.
-
1±²
-
Your org shop can add the tailgaTe,
NSN 251¶-¶1±155±5857µ
MounTing
hardware is shown in Fig. 125, ²M
9-232¶-289-2¶Pµ
It'll come
wiTh
ML¶28's in the ¿ture.
I½ you're building your dunnage Àom
scratch, see SB 11±Á¶ ´r dunnage on
The M884, and make The size changes.
JUN 85
59
Brushing Up
Need new brushes Âr the exhausT
Ãn moTor in your AN/GRC±142 or
-122 plain or Ä thru C model radio
teleTypewriter seT?
No sweatµ I½ your Ãn was made by
IMC Magnetics, geT new brushes with
NSN 5977-¶¶-686-4476µ I½ the Ãn
was Åade by the Rotating ComÆonents
Division o½ InstrumenTs Systems CorƵ
or AeroÇex ÈaboraTories Inc, order
with FSCM ¶2598 PN 323±¶1µ Use
RouTing Identi³er Code (RIC) BL6µ
You org mechs reÆlace bad brushes
during quarTerly services, per ²able 5 1
o½ ²M 11±5815±334±12µ
Back to Top Back to Top
