PS Magazine - DECEMBER 1986
PS, The Preventative Maintenance Monthly
ISSUE 409
DECEMBER 1986
i
I
.±
Heater Lamp PRotecTion
±
Dear Editor,
We've had pRblems with medics b±aking the ON lighT on the
personnel heater's control panel whiLe working with patients.
²he panel³s down low, so it´s easy to bump itµ
We solved the problem by making a protective shield to go
around the control panel¶
Here's what we used:
•
2
x
18-in piece of 1·8-in thick aluminum (NSN 9535-00¸
260¸3079 gets a 12
x
36¹in sheet)¶
•
Six 3·8¸in long pop riveTs, NSN 5320¸00-903¸8778, and the
rivet tool, NSN 5120¸00¹017¸2849¶
1:
_±±²³´
-µ¶·
;¸¹º»
.¼½¾¿
Bend the aluminum so it has three 6Àin sÁdesÂ
Make cuTs At the coRneRs so you can bend 1Ãin fanges on
Each sideÄ
Drill to
1/8-in holes
In eacH fLange
Hold the shield up over the control panel, mark and drIº holes,
then rivet it in place¶
SP4 Jesse Pridgen
F
Polk,
LÅ
(Editor's note: SouNds great. YoU can
Replace bRoken lamps with ±S±
6240±00²
³55²´7µ4,
a²D le²s With ligHT assembly,
±S±
62³0¶00±6´´·50´´.)
CU±V Ambulance ²ight
The rEar clEarance marker light fr the side panel oF your CUCV ambulance
(MLOI±) is not in ²M
9-23±0-²89³±0P.
You can get the light b³ ordering ´SCM
´50±±, PN 19-098µ¶
on a
DD
µorm
·¸48¹6
using R¶C S9·.
³Eplace ´U´v StaµEr Bol¶s
¸ou mechs can head ¹º loose stArters on the CUCV with New mounting bolts,
»S»
º30»¼0·¼±±7½908º¾
¼hese replace the bolts called ¹ut as ¶tem
9
in ´ig
3±
¹½ ¼M
9¿±3±0À±89³±0PÁ
¸ou'll also need two ¾at washers, ´SCM
·86±Ã PN
±±º±·0º4Ä
¿rder them on a
DD
´orÀ
·348Å6
Áom S9CÂ ¼orque these new bolts
to
±º-30
lb-ÃÄ
ÆÇC 8È
É7
Back to Top Back to Top
