PS Magazine - TB 43-PS-414

PS Magazine - TB 43-PS-414 - Page 13 of 33

To do the

ob on alL CUCV's, you need a 31/64-in dril± bit² three expansion shields²

NSN

5340³01´150-4105, three cap screws²

NSN

5305³01´128³4094² three washers²

NSN

5310³01³1µ2¶6655, and silicone seaLant²

NSN

8040³00³877³9872.

Use the sealant to coat the thRee expansion shie±ds before you put them in the holes.

Then coat the three sHieLd faces before you screw in the bracket. That will keep out

dangerous

engine exhaust gases.

Dear Editor,

It's hard to see if the CUCV's four-wheel drive front wheel hubs are

locked or free when the vehicle's camouflaged.

I solved the problem by freeing the hubs and painting a strip acrosS

them. Use a coloR that doesn't cont±st too much with the camouFage.

SSG

James W. WacaSter

²t ³icha´son,

(Eitor's note: Picasso couln't hAve

dne it better. No mTter which coLor

paint you use, get your CO's OK±)

Tutorials