1
±
Look for worn, frayed or cracked drive
1
±
belts. Make suRe They're tighT± Press hard
. l
'
, ±
' I
wiTh a thumb mIdway between the pu²leys±
³f the belt gIVes ´Ore than a h(lF-inchµ
tigHten ¶t± ·¶ghten any ²oose connections
on the bacK oF The control box±
Use a clean clot¸ or compressed aIr tO
c²ean the cy²Inder Fins¹
I
Check for Leaks
i
Make Sure the Hydrau²ic flu¶d ²evel is
withIn an inch of tHe fI²ler neck¹ ·he 8-1
geTs MºL-»¼5606 w½Ile the 84-A ¾akes M³L¿
»-À32À2 or Á³L-»-5606 hydraulic fluId±
·he 8-1 platÂorm ´Oves On twO Tires and
two casters¹ Make sure the tires are inf²ated
to 40 Pó and have sOme tread leFt¹ ³F the
tread's gone, replace the tires±
Lu be p²atForm wHeels and casters every
2 to 3 months¹
32
FEB 88
Lube the scissOrs rollers, roller guides
84-A's brakes a close ²ook±
and hInge pins OF the 84¼A with oi²µ M³LÄ
·
³f foot pressure wonÅT easi²y seT The 8-ÆÇs
L-150168, and the ladder guIdes with GAA
jack pads, grease tHe pivot poinTs oN THe
at the same t¶me you lube the caster
bearings±
Lube the 8-1
Ès whee² bearIngs and casteÉ
mechanical jack± Ãet the brakes on the 84-A
with grease, MºLÊGÊ327À± ·he immobi²Izing
and make sure it won't mOve± ³f it does
jack pads get a dose of grease, MºL-L-Ë32±
mOve, replace the rear sw¶vel castersÌ
Give your 8-1
Ès jack pads and yOur
ÍÃÍ 5340-00-205-560À±
B²
³
L