PS Magazine - TB 43-PS-427
PS, The Preventative Maintenance Monthly
ISSUE 427
JUNE 1988
6
Pump the hydraUlic hand pump
•
Until the spade moves the tire
bEad away fom the rim. Push the
bEad back FAr ENoUgh so yoU'Ll have
RooM to pUt a bEad wedge-banana±
betweeN the bead aNd the ²angE oN
each side oF the spadE tip.
Hand pump
until spade
1-.±
moves bead
7
³elease the pressUre. Pu´l the spade aNd raM assembly fom thE faµe.
•
¶oosen the clampiNg jaw bolts aNd remove the ·rame.
8
¸ove the bEad breakEr to another spot oN the rim aboUt 90 degrees fom
•
the First spot¹in either directioN¹aNd repeat the whole thing. YoU may
havE to ºove the bead breaker 2 or 3 times.
9
IF the tire is Not fee aFter moviNg
•
the tool aroUNd the rim, Use the
»
bEad breaker oN the backside-inner
tire bead¼oF Te tire. YoU doN't NEEd
the fame assembly. JUst block the
½
whEel so it woN't spiN. Brace ¾he raM
agaiNst the vehicle F¿ame aNd let the
spade tip do its thiNg against the iÀNer
tire bEad aNd rim Áange. Keep Te raM
as straight as possible to keep it foM
slippiNg.
-
1 O
WheN ¾he tire is loose oN thE rim, UsE a coUple oF tire irons to pÂy oà the
±
lock riNg, bEad sEat band and oUter Äim Áange.
54
JUN
8±
11
BEFOre yoU take thE tire oÃ,
•
pUt the valvE cap back oN to
protEct the thÄEads. ¸ake sUre ¾He
valve is prÅEd oUt enoUgh to clear the
rÆ gutter.
MO²³TI³g ´IPS fOr ´²BELESS ´IrES
ÇNe tool that'll takÈ some swEat oUt
Snap oN tire pressUrE gage, ÉSÉ
oF MoUNting big tUbEless tires is the
4910Ê00Ê44ËÊ8685. Stay at least Ë0
bEaD expaNdiÌg constrictor, ÉSÉ 49Ë0Ê
FÍet away and oÎ to thE sidE as yoU
00Ê138ÊË8Ë9. It's aUthorÏzed by ÐpÊ
iNÁate the tire. Ñhe tire pressure gage
pENdix B oF Ò¸ 9Ó26Ë0Ê200Ê24.
Play it saÔ. ÇNce the tire is oN thE
rim, make sUre aLL parts-lock ring,
bEad seat and ·Õanges-are whEre
ÖHEy're sUpposed to bE.
×se a tire cage, ÉSÉ 4910Ê00Ø025Ê
0623, while iÙatÚng a tireÛ Üis ÉSÉ is
Not oN the иÝÞ, so ordEr on a ÝÝ
Þoß Ë348Ê6 UsiNg ³IC ÞPZ. It costs
$2,Ë47.55.
JµN
88
55
coMEs with a Ë0àFt hose, qUicáÊdiscoNâ
NEct coUpling and an adapter Fãr Large
valvE stems. YoU'lLaLsoneedastraight
pipeʾoÓtubE adapter, äSä 4730å00Ê
39Ëæ377Ë, to coNNect tHE air sUpply
hose to the gage. It's iN thE brass FÏttiNg
kit in the äo. Ë CoMmoN shop set.
Back to Top Back to Top
