MWO-9-2320-273-20-1
TRUCK TRACTOR, LIGHT EQUIPMENT TRANSPORTER
MODIFICATION WORK ORDER
SEPTEMBER 1989
MWO-9-2320-273-20-1 - Page 17 of 28
MWO 9-2320-273-20-l
NOTE
Step 4 is performed to verify check valve installed in paragraph b., step 6
is functioning properly and air pressure (required for shifting) is maint-
ained in the new air tank only.
(4) Engage~ transmission air charging valve knob and shift from first gear through fifth gear ran-
ges.
(5) Return transmission to neutral and disengage transmission air charging valve knob.
(6) Repeat step 1 and road test vehicle (refer to TM 9-2320-273-10).
NOTE
Spot paint as needed.
M916, M917, M918, M919 and M920.
a. Vehicle Preparation. M916, M917, M918, M919 and M920.
(1) Drain air system (refer to TM 9-2320-273-10).
(2) Remove plug from front of air tank as shown in figure 1.
FIGURE 1
17
Back to Top
