MWO-9-2320-273-20-1
TRUCK TRACTOR, LIGHT EQUIPMENT TRANSPORTER
MODIFICATION WORK ORDER
SEPTEMBER 1989
MWO-9-2320-273-20-1 - Page 22 of 28
MWO 9-2320-273-20-1
NOTE
Coat threads on bushing elbow, check valve, and connector being in-
stalled in steps 4,5,6 and 7 with pipe sealing compound prior to installa-
tion.
(4) Install SAE J530 12-8 130140B bushing in forward end of outer air tank as shown in figure 9.
(5) Install SAE J530 8-8 130239B elbow in bushing on outer air tank as shown in figure 9.
(6) Install 11669271 check valve in elbow on outer air tank as shown in figure 9.
(7) Install SAE J246 10-8 100102BA connector assembly in check valve on outer air tank as shown
in figure 9. Retain sleeve and nut for use in step 8.
NOTE
Position elbows to obtain smooth bend during installation of tube.
(8) Install CPRI044204 tube to inner and outer air tanks and secure with two sleeves and nuts as
shown in figure 9.
FIGURE 9
22
Back to Top
