MWO 9-2320-273-20-1
(1) Install 12357129 air tank and two 12357128 clamp assemblies to two supports and secure with
four MS90725-64 screws, MS27183-14 washers, and MS51943-5 nuts as shown in figure 8. Tighten nuts
finger tight.
(2) Install two screws through two clamps and secure with two washers and nuts as shown in
figure 8. Tighten nuts finger tight.
(3) Ensure outer air tank is positioned as shown in figure 7 and secure nuts installed in steps 1
and 2.
FIGURE 8
21