MWO-9-2320-273-20-1
TRUCK TRACTOR, LIGHT EQUIPMENT TRANSPORTER
MODIFICATION WORK ORDER
SEPTEMBER 1989
MWO-9-2320-273-20-1 - Page 24 of 28
MWO 9-2320-273-20-1
(11) Install two SAE J514 6080109B plugs in rear upper ports on outer air tank as shown in
figure 11.
(12) Install SAE J530 12-8 130140B bushing in port on rear of outer air tank as shown in figure 11.
(13) Install SAE J246 10-8 100202BA elbow assembly in bushing on outer air tank as shown in
figure 11. Retain sleeve and nut for use in step 17.
(14) Cut off one inch of existing 5/8-inch yellow transmission airline as shown in figure 11, and
discard fitting.
(15) Install SAE 1246 10-10100101BA union assembly on 5/8-inch yellow transmission airline
and secure with sleeve and nut as shown in figure 11. Retain sleeve and nut for use in step 16.
(16) Install CPR104420-4 tube on union and secure with sleeve and nut as shown in figure 11.
(17) Route tube to elbow in rear of outer tank, cut tube, and secure to elbow with nut and sleeve
as shown in figures 11 and 12. Sleeve and nut retained from step (13).
FIGURE 1 1
24
Back to Top
