SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 144 of 671
11-24.1. CARGO SHELL DOOR SEAL PROTECTOR REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove thirteen locknuts (4), washers (5), capscrews (2), washers (5), and seal protector (1) from cargo
door (3). Discard locknuts (4).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Thirteen locknuts (Appendix G, Item 77)
Manual References
TM 9-2320-387-10
TM 9-2320-387-24P
Equipment Condition
Rear end of cargo shell door raised
(TM 9-2320-387-10).
b. Installation
Install seal protector (1) on cargo door (3) with thirteen washers (5), capscrews (2), washers (5), and
locknuts (4). Tighten locknuts (4) to 85-100 lb-in. (10-12 N
•
m).
FOLLOW-ON TASK: Close cargo shell door (TM 9-2320-387-10).
SMI 9-2320-387-14&P-1
11-46.2/(11-47 blank)
Change 4
Back to Top
