SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 162 of 671
11-49.3. WEAPON STATION HATCH HINGE PIN REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove two locknuts (3), washers (4), capscrews (7), and washers (4) from hatch hinge pin (5) and
hatch panel (1). Discard locknuts (3).
2.
Remove hatch hinge pin (5) and two spacers (2) from hinge pivot bracket (6) and hatch panel (1).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 77)
Manual References
TM 9-2320-387-24P
b. Installation
1.
Install hatch hinge pin (5) on hatch panel (1) and slide into hinge pivot bracket (6). Slide two
spacers (2) between hatch panel (1) and hinge pin (5) on top side of hatch panel (1).
2.
Secure hatch hinge pin (5) to hatch panel (1) with two washers (4), capscrews (7), washers (4), and
locknuts (3). Tighten locknuts (3) to 6 lb-ft (8 N
•
m).
SMI 9-2320-387-14&P-1
11-98.4
Change 4
Back to Top
