SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 161 of 671
11-49.2. WEAPON STATION HATCH HANDLE REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
Remove two locknuts (1), washers (2), capscrews (5), large washers (4), and handle (6) from hatch (3).
Discard locknuts (1).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 76)
Manual References
TM 9-2320-387-24P
b. Installation
Install handle (6) on hatch (3) with two large washers (4), capscrews (5), washers (2), and locknuts (1).
Tighten locknuts to 6 lb-ft (8 N
•
m).
SMI 9-2320-387-14&P-1
Change 4
11-98.3
Back to Top
