SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 169 of 671

11-49.9. WEAPON STATION HATCH LATCH REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

Remove capscrew (2), washer (1), hatch latch (5), and spacer (4) from weapon station (3).

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Manual References

TM 9-2320-387-24P

b. Installation

Install spacer (4) and hatch latch (5) on weapon station (3) with washer (1) and capscrew (2). Tighten

capscrew (2) to 37 lb-ft (50 N

•

m).

SMI 9-2320-387-14&P-1

Change 4

11-98.11

NOTE

• Procedures for replacing the three hatch latches are basically

the same, except the hatch latch opposite the backrest side of

weapon station has a spacer. This procedure covers the hatch

latch with spacer.

• To increase latch tension, 3/8-in. (9.5 mm) flat washers may be

added between bottom of weapon station and any of the three

hatch latches.