SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 178 of 671

11-108.10

Change 4

SMI 9-2320-387-14&P-1

11-55.3. TURRET CLEANING (Cont’d)

5.

Using fixture (2), drill 0.339-in. (8.611mm) diameter hole (3) in inner bearing (1).

6.

Remove

fixture (2) from inner bearing (1).

CAUTION

Ensure bearings are spread apart where drill bit will come

through inner bearing, or drill bit may damage bearing

7.

Using hole drilled in step 5, drill 0.234-in. (5.944 mm) diameter hole (4) through inner bearing (1)

only.

NOTE

After threading inner bearing hole, clean metal shavings

8.

Using 0.125-27 NPT standard tap, thread hole (5).

DRILL 0.339-IN. (8.611 mm)

DIAMETER HOLE

DRILL 0.234-IN. (5.944 mm)

DIAMETER HOLE

THREAD HOLE 0.125-27 NPT