SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 182 of 671
SMI 9-2320-387-14&P-1
11-108.14
Change 4
11-55.4. TURRET BEARING MAINTENANCE
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
Equipment Condition
Weapon station tray removed (para. 11-49.12).
General Safety Instructions
Compressed air used for cleaning purposes will not
exceed 30 psi (207 kPa). Use only with effective chip
guarding and personal protective equipment
(goggles/shield, gloves, etc.).
This task covers:
a. Removal
c. Installation
b. Cleaning and Inspection
d. Adjustment
1.
Remove twelve locknuts (4), washers (5), and capscrews (2) from roof retainers (1), bearing
assembly (3), and support ring (6). Discard locknuts (4).
2.
Remove twelve roof retainers (1) and bearing assembly (3) from support ring (6).
a. Removal
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Detergent (Appendix C, Item 17)
Twelve locknuts (Appendix G, Item 106)
Back to Top
