SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 190 of 671

11-112.4

Change 4

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Four locknuts (Appendix G, Item 87)

Manual References

TM 9-2320-387-24P

11-59.2. TURRET HANDLE REPLACEMENT

This task covers:

a. Removal

b. Installation

Remove four locknuts (4), washers (2), capscrews (1), washers (2), and turret handle (3) from weapon

station tray (5). Discard locknuts (4).

a. Removal

Install turret handle (3) on weapon station tray (5) with four washers (2), capscrews (1), washers (2),

and locknuts (4).

b. Installation

SMI 9-2320-387-14&P-1

NOTE

• Fabrication instructions are available to replace the turret

handle. Refer to appendix D (fig. D-115).

• The following procedure is for replacement of turret handle

that has been previously removed and installed in accordance

with the fabrication instructions.