SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 197 of 671
11-67.1. RIFLE MOUNTING CLAMP REPLACEMENT (M1151)
This task covers:
a. Removal
b. Installation
a. Removal
Remove two locknuts (2), washers (3), screws (4), washers (3), and clamp (5) from clamp bracket (1).
Discard locknuts (2).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Two locknuts (Appendix G, Item 101.3)
Manual References
TM 9-2320-387-24P
b. Installation
Install clamp (5) on clamp bracket (1), with moveable finger (6) inboard, with two washers (3),
screws (4), washers (3), and locknuts (2).
NOTE
Procedures for replacing the left and right rifle mounting
clamps are basically the same. This procedure covers the right
rifle mounting clamp.
SMI 9-2320-387-14&P-1
Change 4
11-128.1
Back to Top
