SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 198 of 671

11-67.2. RIFLE MOUNTING CLAMP BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 77)

Two locknuts (Appendix G, Item 105)

Manual References

TM 9-2320-387-24P

Equipment Condition

Rifle mounting clamp removed (para. 11-67.1).

NOTE

Replacement procedures for the front and rear rifle mounting

clamp brackets are basically the same. This procedure covers the

right front and right rear bracket.

1.

Remove two locknuts (5), washers (3), capscrews (4), washers (3), and clamp bracket (2)

from A-beam (1). Discard locknuts (5).

2.

Remove two locknuts (6), washers (7), capscrews (9), washers (7), and clamp bracket (8)

from B-pillar (10). Discard locknuts (6).

1.

Install clamp bracket (2) on A-beam (1) with two washers (3), capscrews (4), washers (3), and

locknuts (5).

2.

Install clamp bracket (8) on B-pillar (10) with two washers (7), capscrews (9), washers (7), and

locknuts (6).

b. Installation

a. Removal

SMI 9-2320-387-14&P-1

11-128.2

Change 4