SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 193 of 671

11-59.5. ARMAMENT COVER AND SEAL REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Three locknuts (Appendix G, Item 106)

Locknut (Appendix G, Item 77)

Manual References

TM 9-2320-387-24P

SMI 9-2320-387-14&P-1

Change 4

11-113

a. Removal

1.

Remove locknut (6), washer (4), capscrew (3), and washer (4) from armament cover (5) and weapon

station (8). Discard locknut (6).

2.

Remove three locknuts (7), washers (1), capscrews (2), washers (1), and armament cover (5) from

weapon station (8). Discard locknuts (7).

3.

Remove seal (10) from armament cover (5). Clean armament cover (5) to remove adhesive.

NOTE

Note locations of capscrews for installation.

b. Installation

1.

Peel paper backing (9) from seal (10) and apply seal (10) to armament cover (5).

2.

Install armament cover (5) on weapon station (8) with three washers (1), capscrews (2), washers (1),

and locknuts (7).

3.

Secure armament cover (5) to weapon station (8) with washer (4), capscrew (3), washer (4), and

locknut (6).

4.

Tighten locknut (6) to 65 lb-in. (7 N

•

m). Tighten locknuts (7) to 12 lb-ft (16 N

•

m).