SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 189 of 671
11-56.2. HINGE PIVOT BRACKET AND GUNNER’S SLING REPLACEMENT
This task covers:
a. Removal
b.
Installation
a. Removal
1.
Remove locknut (8), washer (2), capscrew (3), washer (2), gunner’s sling (9), and hinge pivot
bracket (6) from weapon station (1). Discard locknut (8).
2.
Remove capscrew (4), washer (5), and hinge pivot bracket (6) from weapon station (1) and rear
hinge pin (7).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Locknut (Appendix G, Item 106)
Manual References
TM 9-2320-387-24P
b. Installation
1.
Install hinge pivot bracket (6) on rear hinge pin (7).
2.
Install hinge pivot bracket (6) on weapon station (1) with washer (5) and capscrew (4). Tighten
capscrew (4) to 37 lb-ft (50 N
•
m).
3.
Install hinge pivot bracket (6) and gunner’s sling (9) on weapon station (1) with washer (2),
capscrew (3), washer (2), and locknut (8). Tighten locknut (8) to 37 lb-ft (50 N
•
m).
SMI 9-2320-387-14&P-1
Change 4
11-109
Back to Top
