SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 196 of 671
11-66.1. RIFLE SUPPORT REPLACEMENT (M1151)
This task covers:
a. Removal
b. Installation
a. Removal
Remove three locknuts (5), washers (2), capscrews (1), washers (2), and rifle support (3) from floor
panel (4). Discard locknuts (5).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Three locknuts (Appendix G, Item 82)
Personnel Required
One mechanic
One assistant
Manual References
TM 9-2320-387-24P
b. Installation
Install rifle support (3) on floor panel (4) with three washers (2), capscrews (1), washers (2), and
locknuts (5). Tighten locknuts (5) to 12-17 lb-ft (16-23 N
•
m).
SMI 9-2320-387-14&P-1
11-126.2/(11-127 blank)
Change 4
Back to Top
