SMI-9-2320-387-14P-1

TRUCK, UTILITY: EXPANDED CAPACITY

SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS

JULY 2004

SMI-9-2320-387-14P-1 - Page 165 of 671

11-49.5. WEAPON STATION HATCH HOLDDOWN STRIKER REPLACEMENT

This task covers:

a. Removal

b. Installation

a. Removal

1.

Remove two locknuts (5), washers (4), screws (1), and holddown striker (2) from bracket (3). Discard

locknuts (5).

2.

Remove two locknuts (7), washers (8), capscrews (9), washers (8), and bracket (3) from left hatch

panel (6). Discard locknuts (7).

NOTE

This task covers the left hatch panel holddown striker. The right

hatch panel holddown striker is mounted directly on the panel.

INITIAL SETUP:

Applicable Models

M1151

Tools

General mechanic’s tool kit:

automotive (Appendix B, Item 1)

Materials/Parts

Two locknuts (Appendix G, Item 77)

Two locknuts (Appendix G, Item 76)

Manual References

TM 9-2320-387-24P

b. Installation

1.

Install striker (2) on bracket (3) with two screws (1), washers (4), and locknuts (5).

2.

Install bracket (3) on left hatch panel (6) with two washers (8), capscrews (9), washers (8),

and locknuts (7). Tighten locknuts (7) to 6 lb-ft (8 N

•

m).

SMI 9-2320-387-14&P-1

Change 4

11-98.7