SMI-9-2320-387-14P-1
TRUCK, UTILITY: EXPANDED CAPACITY
SUPPLEMENTAL OPERATION, MAINTENANCE, AND REPAIR PARTS INSTRUCTIONS
JULY 2004
SMI-9-2320-387-14P-1 - Page 166 of 671
11-49.6. WEAPON STATION TRAY SEAL REPLACEMENT
This task covers:
a. Removal
b. Installation
a. Removal
1.
Remove seal (1) from weapon station (2).
2.
Thoroughly clean the edge of weapon station (2).
INITIAL SETUP:
Applicable Models
M1151
Tools
General mechanic’s tool kit:
automotive (Appendix B, Item 1)
Materials/Parts
Adhesive (Appendix C, Item 4)
Manual References
TM 9-2320-387-24P
b. Installation
1.
Measure and cut required length of seal (1).
2.
Apply a 1/16-in. (1.6 mm) to 1/8-in. (3.2 mm) bead of adhesive to seal (1) lip.
3.
Starting somewhere other than at a corner, press seal over the lip of the weapon station (2) tray
hatch opening.
4.
Allow seal (1) to set and cure undisturbed, for about one hour.
SMI 9-2320-387-14&P-1
11-98.8
Change 4
Back to Top
